软管泵拦水带成型机讲信誉保质量

软管泵的典型用途：
化工行业，各种防腐蚀浆料和无机盐物料；石油、钻井、水处理、泥浆、石灰浆；采矿冶金的充填物料，矿浆输送；食品行业，油类物料及饮料，糊状料输送；造纸行业，纸浆、硫磺输送；建筑业，水泥沙浆、泡沫混凝土生产线，楼顶屋泡沫轻质流体物料；油漆、涂料、钛 、二氧化碳等物料输送。

Typical use of hose pump:
Chemical industry, various anti-corrosion slurry and inorganic salt materials; petroleum, drilling, water treatment, mud, lime slurry; filling materials for mining and metallurgy, slurry transportation; food industry, transportation of oil materials and beverages, paste; papermaking Industry, pulp and sulfur transportation; construction industry, cement mortar, foam concrete production line, rooftop foam light fluid materials; paint, coating, titanium dioxide, carbon dioxide and other materials transportation.

不锈钢软管泵的保养：不锈钢泵紧固端面螺栓时，不锈钢泵用力要对称均匀；边紧边盘动转子。若遇到卡涩，不锈钢泵应松掉螺栓重新紧。电泵泵驱动轴不能承受任何径向垂直力，皮带、链条、齿轮等侧向驱动方式禁止使用。底板强的驱动轴与电机轴的连接采用弹性联轴器或链式联轴器。软管泵的齿轮油度要够，不要时间长了泵的底板一软，造成电机与泵不对中而损坏泵。弄清楚泵的允许高转速和现场工作高转速。务必让流体进到入口，尽量不要干转和空转。                 

软管泵主要有泵壳、转子体、减速机、机座和软管等5大部分组成。泵的耐久性主要决定于管子的弹性和耐腐蚀性，其流量与电动机的转速和管子内径大小有关。

The hose pump is mainly composed of 5 parts: pump casing, rotor body, reducer, base and hose. The durability of the pump is mainly determined by the elasticity and corrosion resistance of the pipe, and its flow rate is related to the speed of the motor and the inner diameter of the pipe.